machinery & equipment for sale
items for sale
Forklift
Hydraulic Guillotine
200T Hydraulic Press
Metal Cutting Band Saw
Curving rolls
Metal Printer-Engraver
Air Compressor
Spot Welder
Manual Panbrake
Pedestal Drill
Air Receiver
TIG & ARC Welder
Hand Lever Shear
Pedestal Buffer
Bench Grinder
Shrinker Stretcher
Bench & Offset Fabricated Vice
Forklift Jib Attachment
FG25HT-16 FORKLIFT
BX50 SERIES
MINIMAL USE – 1 ONLY
Fuel Type: Petrol
Year: 2010
Rated Capacity (kg): 2500
Load Centre (mm): 500
Mast type: 2 Stage Mast
Mast Height, extended (mm): 4050
Tyre Type: Pneumatic
HG-440B – Hydraulic NC Guillotine
MINIMAL USE – 1 ONLY
- 1300mm x 4mm cutting capacity
- 5.5kW / 7.5hp 415V motor
- Ezy-Set NC-89 Go-To digital display controlled backgauge with DRO counter
- Quick action blade clearance adjustment for shearing material 1 – 4mm
- Hydraulic material clamping for accurate shearing
- One shot lubrication pump & reservoir for slideway protection
- Blades made from 9CrSi material suitable for cutting stainless steel
- Plate support tables with transfer balls for quick & easy material alignment and manoeuvrability
- Front sheet supports with ball bearing guides preventing material damage when setting up
- Safety three photo electric light beams on rear guarding
- Safety reset rear guarding button mounted to back of electrical box
- Heavy duty under driven machine construction
- Equipped with shadow line lighting-alignment device
- Roving foot pedal control
- Mild steel capacity is rated on hot rolled material with 250MPA
- Pre-Commissioning:
- 1. Guillotine is run & tested prior delivery
- 2. Hydraulic oil is included with machine
200 tonne INDUSTRIAL HYDRAULIC PRESS
NEVER BEEN USED – 1 ONLY
• Easy to use and powerful press for most applications
• Ideal for the repair of axles, shafts, & press fit of bearings & bushings • Ram speed down 6.7mm/sec, returns 5.0mm/sec
• Heavy duty welded steel fabricated frame
• Strong hydraulic cylinder ensures precise pressing during operation • Fitted with pressure gauge
• Safety overload valve
• Hydraulic joystick control lever
• Powerful TEFC motor
• Heavy duty one piece table plate insert
• Extra heavy duty table support with high tensile setting pins
• Table can be adjusted for height using chains and Hydraulic ram • Pre-Commissioning:
• 1. Press is run & tested prior delivery
• 2. Hydraulic oil is included with machine Includes
• Includes support plate & V blocks
BS-13DS – Semi – Automatic, Swivel Head-Dual Mitre Metal Cutting Band Saw
NEVER BEEN USED – 1 ONLY
- 458 x 235mm (W x H) rectangular capacity
- Double mitre swivel head for easy angle cutting without moving material
- Semi-automatic operation, machine returns to open height position after finishing the cutting process
- Automatic hydraulic vice incorporated with a manual hand wheel
- Adjustable hydraulic vice pressure regulator
- Hydraulic operated system raising and lowering the cutting beam
- Adjustable hydraulic feed cutting rate for multiple applications
- Blade breakage sensor fitted that automatically shuts machine off
- Mitre cuts to 45o right & 60o left using swivel head
- Built-in coolant system for maximum cutting efficiency with wash down trigger
- Laser line guide assist in lining up material positioning
- Adjustable variable blade speed system enabling 19-102mpm cutting speeds
- Limit switch stops machine and raises cutting beam when cut is complete
- Swivelling electric control panel mounted on base for quick operation
- Combination roller bearing & carbide blade guides
- Heavy duty cast iron blade wheels
- Large mitre scale – easy to read
- Cast Iron frame with heavy duty fabricated base
- Adjustable blade roller guides provides accurate cutting
- Adjustable length stop for repetition cutting
- Wire wheel brush to clean swarf from blade
- Industrial-duty gearbox driven by a 1.5kW / 2hp 415V motor
PR-133 – Motorised Plate Curving Rolls
MINIMAL USE – 1 ONLY
- Initial pinch rolls with pre-bending
- Two rolls powered by gearbox drive system
- Swing out top roller enables cylinder to be removed
- Safety wire interlock system with emergency shut-off
- Precision ground rolls with wiring grooves
- Includes a conical bending guide roller
- Mobile foot pedal control
- Mild steel capacity is rated on hot rolled material with 250MPA
ROLAND MPX-90 ENGRAVER & IMPACT PRINTER
NEVER BEEN USED – 1 ONLY
Printable material: Gold, silver, copper, platinum, brass, aluminium, iron, stainless steel (Vickers hardness [HV] of the printing surface must be 200 or less.)
Loadable material size:
Maximum 100 mm (width) x 200 mm (length) x 40 mm (thickness) [3.9 in. x 7.9 in. x 1.5 in.]
200 mm (width) x 100 mm (length) x 40 mm (thickness) [7.9 in. x 3.9 in. x 1.5 in.]
K30SI – Silenced Air Compressor
NEVER BEEN USED – 1 ONLY
Maxx Pressure (PSI): 174
Max Pressure (kPa): 1200
Features
- Steel cabinets lined with acoustic foam to deaden noise and maximise cooling air flow
- Thermostat-controlled cooling fans combined with over-temp. protection ensure correct operation
- K-Series db(A) ranges approx. 63 to 68
4640-16 – Industrial Pedestal Spot Welder
MINIMAL USE – 1 ONLY
16kVA
Maximum welding thickness (mm): 2.5 + 2.5
Maximum welding power (kVA): 35
- Adjustable electrode stroke
- Water-cooled transformer, arms and electrodes
- Adjustable electrode force; a micro switch starts the welding cycle when the desired pre-set value is reached
- TE101 TECNA MICROPROCESSOR CONTROL UNIT:
- Synchronous thyristor drive with phase-shift control for welding current adjustment.
- Built in ammeter (RMS value), 2 selectable ranges (18-56 kA).
- Storing of 99 welding programs.
- Inputs for external selection of 31 programs or 15 programs with parity control.
- Welding times adjustment in half-periods.
- Pre-weld, slope and pulse functions.
- Welding current control limits. Error condition signalling output and function to stop welder operation.
- Single and repeat operating mode. WELD/NO WELD function.
- Welding current compensation function to assist welding of oxidised sheets and rods
PB-416D – Manual Panbrake
MINIMAL USE – 1 ONLY
1260 x 1.5mm Mild Steel Bending Capacity
- “NO BULL CAPACITY” – Australian Tested & Rated To True Working Capacity
- High quality finish
- Robust steel fabricated construction
- Foot clamping, allowing material to be positioned & clamped at the same time
- Ideal for schools, bending is assisted by heavy duty telescopic springs
- Removable individual bending fingers for pans or boxes
- Mild steel capacity is rated on hot rolled material with 250MPA
PD-35 – Industrial Pedestal Drill – Belt Drive
MINIMAL USE – 1 ONLY
Drill Capacity (mm): 31.5
Spindle Taper (MT): 3
Spindle Travel (mm): 125
Throat Depth (mm): 225
- Quick action belt tensioning lever
- Adjustable safety drilling chuck guard with micro switch
- Safety micro switch on pulley guard
- Safety magnetic-type switch & emergency stop switch
- Rack & pinion table height adjustment with locking lever
- Thick walled column ensuring greater rigidity
- Table tilts left & right to 45o & rotates 360o
- Drilling depth stop setting with scale
- 9 Spindle speeds – 180, 300, 320, 310, 430, 480, 620, 1050, 1200, 1680rpm
- 240V Fan-cooled motor rated for continuous use with overload protection
3100150 – Industrial Vertical Air Receiver
NEVER BEEN USED – 1 ONLY
Tank capacity (Litre): 150
Tank inlet & Outlet threads: 1-1/2″
Connecting hose thread: 3/4″
Pressure capacity (kPa / PSI): 1100 / 160
Tank diameter (mm): 420
Overall height dimension (mm): 1550
- Manufactured to AS1210-3 and supplied with manufacturer’s data report
- Supplied as standard with safety valve, pressure gauge and manual condensate drain
- Finished in industrial grade enamel
- Custom build and horizontal air receivers available on request
S-406 – Hand Lever Shear
NEVER BEEN USED – 1 ONLY
- Heavy duty steel fabricated
- High quality hardened blades
- Spring assisted return handle
- Adjustable material thickness guide
- Spare blades available
BUFF-225 – Pedestal Buffer
MINIMAL USE – 1 ONLY
- Full cast iron body
- Adjustable eye shields
- Safety stop switch
- Tapered spindle
- 225 x 25mm buffing wheels
- Includes pedestal stand & dust chutes
Razorweld 200P – DC TIG & ARC Inverter Welder-High Frequency
- Latest IGBT Inverter Technology
- Digital Weld Program Sequence Control
- DC TIG (DC tungsten inert gas welding)
- HF Arc Ignition (prevents tungsten inclusion & tungsten damage)
- Adjustable Pulse Frequency 0.5 – 200Hz
- Peak Current, Base Current and Pulse Width Adjustment
- 2/4T Trigger + Spot Time Adjustment
- Start & Final Current Adjustment
- Pre and Post Gas Flow Adjustment
- Up and Down Slope Adjustment
- Remote Torch Amp Control
- MMA (stick electrode)
- Arc Ignition
- Arc Force
- Thermal Overload Protection
- Generator compatible (recommend 9.0KVA 230V)
BG8-915 – Industrial Bench Grinder with Linishing Attachment 200mm 1HP
MINIMAL USE – 1 ONLY
- True 1hp motor for maximum torque
- Unique adjustable oval eye shields with magnifying glass
- Pre-load bearings (no end play)
- Heavy sheet metal wheel guards
- Includes a 915 x 50mm linishing attachment fittedIncludes
- Cast tool rests
- Wheel dresser
- Water tray
- Work light
SHST-1.6HD – Shrinker Stretcher – Heavy Duty
MINIMAL USE (TEST ONLY) – 1 ONLY
- 1.6mm mild steel capacity
- Shrinks metal for inside bends
- Stretches metal for outside bends
- Works on flanges up to 205mm wide
- Easy foot pedal operation
- Strong steel stand provides an ideal working heightIncludes
- 1 x set of shrinking dies
- 1 x set of stretching dies
No. 6 – Bench Vice – Cast Iron
150mm ENGINEERS BENCH VICE
NEVER USED – 1 ONLY
Rigid and robust, the body and sliding jaw are cast from close grained grey iron which is CNC manufactured on all friction surfaces for a smooth reliable action.
The jaws, handle and main screw are steel, the latter having a two-start rolled acme thread to speed the jaws from fully closed to fully open with a minimum of winding.
Here you can create the content that will be used within the module.
60212 – Offset Fabricated Vice – Steel
100mm Right Hand Offset Vice
NEVER USED – 1 ONLY
- Right hand offset vice
- Replaceable case hardened jaws
- Replaceable nut and screw
- Corrosive resistant screw and handle
FLA-2T – Forklift Jib Attachment
MINIMAL USE – 1 ONLY
Lifting capacity (W.L.L.) (Tonne): 2
Width (mm): 635
Safety chain length (mm): 1200
Fork tyne location sports *W x H) (mm): 153 x 60
*Please note forklift capacity must be rated W.L.L 2 Tonne (2000kg) or greater
Features
- T bar screw locks for fork tyne’s
- Swivel hook with latch
- Steel construction
- Complies with standard AS/NZS2359.1